
Model LR60H 6000/5000 Watts
Generator type totally brushless with capacitor, copper windings voltage plus™, <6% distortion, exclusive smooth wave™, csa listed.
FRAME SPECIFICATIONS:
| NET DIMENSIONS (METRIC) |
| L |
W |
H |
|
| 28(71) |
22(56) |
25(64) |
|
| PACKED DIMENSIONS |
| L |
W |
H |
CUBIC FT |
| 28.5(72) |
22.5(57) |
25.5(65) |
9.5 |
|
 |
| |
WATTS |
|
RATED AMPS |
|
|
|
|
WEIGHTS |
| MODEL |
MAXIMUM
Surge |
RATED
Continuous |
VOLTAGE |
@120V |
@240V |
FREQ. |
PHASE |
RPM |
ENGINE |
NET |
PKD. |
| LR60H |
6000 |
5000 |
120/240 |
41.6 |
20.8 |
60Hz |
1 |
3600 |
11HP HONDA GX340 |
179 |
193 |
| RECEPTACLES |
PLUGS REQUIRED FOR RECEPTACLES
(Not Supplied) |
| 2-20 AMP, 120V, GFI NEMA, 5-20R (4 OUTLETS
2 DUPLEX) |
5-15P OR 5-20P |
| 1-30 AMP, 120V, TWISTLOCK, NEMA L5-30R |
L5-30P |
| 1-20 AMP, 240V, TWISTLOCK, NEMA L14-20R |
L14-20P |
| CIRCUIT BREAKER FOR EACH RECEPTACLE STANDARD |
| VOLTMETER, HOUR METER (ELAPSED TIME), & EASY IDLE STANDARD |
| FULL POWER SWITCH AT 120 VOLTS & 240 VOLTS STANDARD |
| FUEL TANK 5 GALLONS |
LR60H |
| RUN TIME 1/2 LOAD |
10.4 HOURS |
| RUN TIME FULL LOAD |
7.6 HOURS |
ENGINE & DECIBELS (AVERAGE VALUES)
| DBA |
MODELS
ALL ENGINES FEATURE SOLID STATE IGNITION AND RECOIL STARTERS |
CAST IRON CYLINDER LINER |
| 75 |
LR60H AT 7 METERS 11 HP HONDA, OHV, RECOIL START, LOW OIL SHUT DOWN, LOW TONE MUFFLER |
337 CC |
FRAME 1" WELDED STEEL ROLL CAGE FRAME WITH ISOLATED RECESSED CONTROL PANEL
CHANGES: All specifications and dimensions are subject to change without notice and there is no obligation to make changes in units previously sold. RATINGS: Apply to altitudes up to 1000 feet, standard cooling, normal ambients and gasoline fuel. Reduce ratings 3-1/2% for each 1000 feet above sea level and 1% for each 10∞ Fahrenheit rise above 60∞ Fahrenheit. Connection of a generator to a home or building requires a transfer switch. Consult a qualified technician.
*Electric start models are shipped less battery. Required battery 300 cold cranking Amps, 5" Maximum width. Battery Type U1 12 Volts DC.
Copyright © 2009 Wanco Inc. All rights reserved. Disclaimer Information
|