Model LR70EH-SG 7000/6500 Watts*
Designed for robotic roof welders and other handheld tools, with total
120VAC and 240VAC ground-fault protection.
FRAME SPECIFICATIONS:
| NET DIMENSIONS (METRIC) |
| L |
W |
H |
WEIGHT |
|
| 30(76) |
24(61) |
25(64) |
213(97) |
|
| PACKED DIMENSIONS |
| L |
W |
H |
WEIGHT |
CUBIC FT |
| 31(79) |
25(64) |
31(79) |
227(103) |
13.9 |
|
LR70EH-SG
|
| WATTS |
|
RATED AMPS |
|
|
|
|
MAXIMUM
Surge |
RATED
Continuous |
VOLTAGE |
@120V |
@240V |
FREQ. |
PHASE |
RPM |
ENGINE |
| 7,000 |
6,500 |
120/240 |
54.1 |
27 |
60Hz |
1 |
3600 |
11HP HONDA GX390 |
| RECEPTACLES |
PLUGS REQUIRED FOR RECEPTACLES
(Not Supplied) |
| 3-120V 20A DUPLEX, 5-20R (6 OUTLETS, 3 DUPLEXES) |
5-15P OR 5-20P |
| 1-240V 20A TWIST-LOCK, L14-20R |
L14-30P |
| 1-240V 50A STRAIGHT-BLADE, 14-50R |
14-50P |
| CIRCUIT BREAKER PROTECTOR FOR EACH RECEPTACLE |
| FUEL TANK 8 GALLONS (APPROXIMATE) |
|
| RUN TIME 1/2 LOAD |
13.4 HOURS |
| RUN TIME FULL LOAD |
10.3 |
ENGINE & DECIBELS (AVERAGE VALUES)
| DBA |
MODELS
ALL ENGINES FEATURE SOLID STATE IGNITION AND RECOIL STARTERS |
DISPLACEMENT |
| 76 |
LR70EH-SG AT
7 METERS 11HP HONDA, OHV, LOW OIL SHUT DOWN, ELECTRIC START*
WITH AUXILIARY RECOIL STARTER, LOW TONE MUFFLER, CAST IRON
CYLINDER LINER |
389 CC |
FRAME: 1" WELDED STEEL ROLL CAGE FRAME WITH ISOLATED RECESSED CONTROL PANEL — STANDARD
CHANGES: All specifications and dimensions
are subject to change without notice and there is no obligation to make
changes in units previously sold. RATINGS: Apply to altitudes
up to 1000 feet, standard cooling, normal ambients and gasoline fuel.
Reduce ratings 3 1/2% for each 1000 feet above sea level and 1% for each
10° Fahrenheit
rise above 60° Fahrenheit. SG-series generators cannot be used with a
transfer switch.
*Electric start models are shipped without a battery.
Required battery: 300 CCA, 5" maximum width, type U1, 12 VDC.
Copyright © 2009 Wanco
Inc. All rights reserved. Disclaimer Information
|
